formulations FOR LAUNDRY APPLICATIONS

Formulation finder

Formulation

Fabric Softener, approximately 18 %

1.5.0/2010969

based on REWOQUAT WE 28, approximately 18 %

Phase	Ingredients	%W/W
1	Water	78.4
	Dyestuff, 1%	0.60
	REWOQUAT® WE 28 RM (Dihydrogenated Palmoylethyl Hydroxy- ethylmonium Methosulfate)	20.00
	Calcium Chloride, 25 %	0.20 - 0.60
	Perfume oil (Parfum)	0.60

Processing

Heat the water to approximately 45°C. Add the dyestuff and the antifoam solution if required. Slowly disperse in the REWOQUAT WE 28, preheated to approximately 50°C, adding calcium chloride solution sufficient to maintain a good processing viscosity. Stir for about 10 minutes and cool to approximately 25°C, adding the perfume oil at between 30 - 35°c. Finally adjust to the required viscosity with calcium chloride, not below 30°C.

Remarks

Stir continuously throughout the preparation process. As far as possible avoid air entrainment. A substantial increase in the amount of calcium chloride could lead to separation of the dispersion. A dispersion with a preferred viscosity of approximately 80 mPas (+/- 40 mPas). Brookfield LVT, Sp. 1, 30rpm.

Download PDF